Overview
The PLANIX Pro saves project data to a USB flash drive, so most data problems come from the drive itself: its format, how full it is, or how it was removed. This article covers USB drive best practices and how to fix common drive errors.
In This Article
USB Flash Drive Best Practices
- Use a recommended drive such as the SanDisk Ultra Flair 16 GB.
- Don't fill the drive beyond 75%. Past that point, write speeds drop by 50%.
- Always copy projects to your computer before opening them in Stitch. Never run a project directly from the USB drive.
- Eject safely using the Safe Eject button in Survey Settings, or power off the camera before removing the drive.
- Format USB drives as FAT (MSDOS), FAT16, or FAT32 with a single partition.
Fixing USB Drive Errors
- "NO DISK" error: Reinsert the drive. If the error continues, the drive may be damaged — replace it.
- Corrupted images: Usually caused by removing the drive while the camera was on. In Stitch, right-click any affected pano and choose Reload to recreate it.
If data issues continue, open a ticket and attach your logs — see Submitting PLANIX Pro Logs for Support.
Comments
0 comments
Please sign in to leave a comment.