On-site Upload

This article will explain how to upload from site to create your iGUIDE!

Uploading data via Survey/Smart Device

In Survey, confirm that your laser data is aligned as precise as possible (using a PLANIX you can snap data that is out of place using the Align button in the “Survey” screen)

1. Once aligned, in Survey go to the Project page. See Figure 1.

Figure 1 - PLANIX Project screen selection

1. Once on the Project screen, select the Export to Stitch .TAR Icon. See Figure 2.

Figure 2 - Export to Stitch .TAR Icon

1. Once selected you will receive the following prompt: "Export to Stitch TAR for iGUIDE Upload. IMPORTANT: If you are submitting this data for drafting, ensure adequate alignment of laser scans.“ See Figure 3. Select OK to begin the export.

Figure 3 - Export Confirmation

1. You will then see the export screen as your device processes the file. See Figure 4.

Figure 4 - Export progress

1. Once Completed, press “Finish” to complete the export process. See Figure 5.

Figure 5 - Finishing the export process

1. Once the Export Process is complete, you will then have the option to Download the file from Survey (see figure 6) - this saves locally to your Smart Device file system so that you are able to create an iGUIDE “on-the-fly”.

Please note, you will need either a Mobile Data connection or a WiFi connection to do this. These files can be large (depending on how many panos taken) so if using mobile data, please make sure that you have enough data in your plan to support this.

Figure 6 - Download exported Stitch .TAR file.

1. Once downloaded, please navigate to the “Create New iGUIDE” page, and follow the steps below to create your iGUIDE.
2. How to Create an iGUIDE

   1. Creating & Uploading an iGUIDE via Stitch/Portal.

      Once you have confirmed that your data is aligned correctly in Stitch, and you have made any image edits required, export the file then simply go to +Create New iGUIDE as per usual.

      1. Choose your package: Radix was used in the screenshot example below(no drafted floor plan). See Figure 7.

      

      Figure 7 - iGUIDE Radix selection

      Please note, the iGUIDE Radix package will be added to your monthly bill immediately once Stitch Data is Uploaded. This Package cannot be converted to a Standard iGUIDE at a later time.

      1. Set up the iGUIDE as you usually would; enter the address, confirm agent branding (if necessary) and complete the form up until the Stitch Upload area. Once you have selected your .tar export file, make sure that there are no errors, your upload should look as below. See Figure 8.

      

      Figure 8 - iGUIDE Radix upload

      Should you find an error message on-screen such as below (see figure 9) this means you may have processed your data in an older version of Stitch, please browse to the goiguide.com/downloads page and update your version of Stitch, then re-export your project.

      

      Figure 9 - iGUIDE Radix upload error

      When the upload is complete, you can make changes to the iGUIDE in the portal as per usual. Once the iGUIDE is ready, you will receive a report automatically via email.