Exporting an iGUIDE from Survey

This is only possible with a PLANIX System, IMS-5 is not supported.

In Survey, confirm that your laser data is aligned as precisely as possible

1. Once aligned, in Survey go to the Project page. See Figure 1.

Figure 1 - PLANIX Project screen selection

2. Once on the Project screen, select the Export to Stitch .TAR Icon. See Figure 2.

Figure 2 - Export to Stitch .TAR Icon

3. Once selected you will receive the following prompt: "Export to Stitch TAR for iGUIDE Upload. IMPORTANT: If you are submitting this data for drafting, ensure adequate alignment of laser scans.“ See Figure 3. Select OK to begin the export.

Figure 3 - Export Confirmation

4. You will then see the export screen as your device processes the file. See Figure 4.

Figure 4 - Export progress

5. Once Completed, press “Finish” to complete the export process. See Figure 5.

Figure 5 - Finishing the export process

6. Once the Export Process is complete, you will then have the option to Download the file from Survey (see figure 6) - this saves locally to your Smart Device file system so that you are able to create an iGUIDE “on-the-fly”. Please note, you will need either a Mobile Data connection or a WiFi connection to do this. These files can be large (depending on how many panos taken) so if using mobile data, please make sure that you have enough data in your plan to support this.

Figure 6 - Download exported Stitch .TAR file.