iGUIDE Radix on PLANIX Pro

This article will explain how to create an iGUIDE Radix on the portal via PC and smart device, and how to upload modified data (corrections, additions, etc.)

Creating & Uploading an iGUIDE Radix via Survey/Smart Device (PLANIX Version).

In Survey, confirm that your laser data is aligned as precise as possible (if using PLANIX you can snap data that is out of place using the Align button in the “Survey” screen)

1. Once aligned, in Survey go to the Project page. See Figure 4.

Figure 4 - PLANIX Project screen selection

1. Once on the Project screen, select the Export to Stitch .TAR Icon. See Figure 5.

Figure 5 - Export to Stitch .TAR Icon

1. Once selected you will receive the following prompt: "Export to Stitch TAR for iGUIDE Upload. IMPORTANT: If you are submitting this data for drafting, ensure adequate alignment of laser scans.“ See Figure 6. Select OK to begin the export.

Figure 6 - Export Confirmation

1. You will then see the export screen as your device processes the file. See Figure 7.

Figure 7 - Export progress

1. Once Completed, press “Finish” to complete the export process. See Figure 8.

Figure 8 - Finishing the export process

1. Once the Export Process is complete, you will then have the option to Download the file from Survey (see figure 9) - this saves locally to your Smart Device file system so that you are able to create an iGUIDE “on-the-fly”. Please note, you will need either a Mobile Data connection or a WiFi connection to do this. These files can be large (depending on how many panos taken) so if using mobile data, please make sure that you have enough data in your plan to support this.

Figure 9 - Download exported Stitch .TAR file.

1. Once downloaded, please navigate to the “Create New iGUIDE” page, and follow the same steps as Method A.

How to upload an iGUIDE Radix update/modification.

Why you would need to update the Radix with new data:

1. You noticed on the 3D tour that something wasn’t aligned correctly

2. You returned to the site and obtained missing data

3. You returned to the site to update the iGUIDE Radix with new data

These are just a few examples of what may be the reason for an update/modification. Updating an iGUIDE Radix is simple, below are the instructions on how to do this.

1. Browse to manage.youriguide.com and find your iGUIDE Radix (you can also filter specifically for iGUIDE Radix’s using the search filters) Select the iGUIDE Title, or click on iGUIDE Details. See Figure 10.

Figure 10 - Title/iGUIDE Details link

1. Once you are on the “iGUIDE Details” page, look to the left-hand side of the page, where you have the Menu: “Operator Actions” - under this menu Select “Stitch Data”. See Figure 11.

Figure 11 - Stitch Data Menu Item

1. Once you are on the “Stitch Data” page, you will see that you have the “Upload New Stitch Data” option, select this and you will be able to re-upload the data. See Figures 12 & 13.

Figure 12 - Upload New Stitch data button

Figure 13 - Upload new Data

1. Once your upload is complete, it may take up to 1 minute per pano to process & publish.