Create an iGUIDE Radix on the Portal
Last updated
Was this helpful?
Last updated
Was this helpful?
iGUIDE Radix provides the technology for insurance and restoration professionals to capture comprehensive property data to estimate the cost of damages quickly and efficiently. It is an easily shareable 3D tour with lidar point cloud data and panoramas. The 3D tour works in the same way you have come to expect with an iGUIDE; however, there are no drafted floor plans, which means your 3D tour is online and available within a number of hours, giving you the edge when it comes to turn-around time.
Creating an iGUIDE Radix is simple; there are two methods:
Align the laser data in Survey and perfect in Stitch
Align the laser data in Survey and upload it from your mobile device. See - The steps are similar for the R1.
Once you have confirmed that your data is aligned correctly in Stitch and made any required image edits, export the file and simply go to page on the iGUIDE Portal as usual.
Choose your package: Select Architecture & Remodel, Facility Management, or create a custom package and then select the iGUIDE Radix. See Figure 1 below.
Please note that the iGUIDE Radix package will be added to your monthly bill immediately once Stitch Data is Uploaded.
This Package cannot be converted to a Standard iGUIDE at a later time.
Set up the iGUIDE as you usually would: enter the address, confirm agent branding (if necessary), and complete the form up until the Stitch Upload area. Once you have selected your .tar export file, make sure that there are no errors. Your upload should look like the one below. See Figure 2.
When the upload is complete, you can make changes to the iGUIDE in the portal as usual. Once the iGUIDE is ready, you will automatically receive a report via email.
If you find an error message on-screen, such as the one below (see Figure 3), this means you may have processed your data in an older version of Stitch. Please browse to the page, update your version of Stitch, and then re-export your project.
