PLANIX R1 Sounds
When operating your iGUIDE camera system, audible tones provide key feedback during the scanning process. These sounds help guide workflow and ensure that you only move at appropriate times.
Last updated
Was this helpful?
When operating your iGUIDE camera system, audible tones provide key feedback during the scanning process. These sounds help guide workflow and ensure that you only move at appropriate times.
Last updated
Was this helpful?
Beep is the first tone after clicking the capture button. This tone indicates that the capture is complete.
You may now safely move the camera, doing so will not affect the image or LiDAR data.
Note: Data processing may still happen in the background even though capture is done.
Duh-doo is the second tone after clicking the capture button. This tone means the shoot button is reactivated, and the system is ready for the following scan. At this point, the preview image will become visible.
By comparing the time between the beep and the duh-doo, you can assess the processing delay between scan completion and camera readiness for the following capture.
When NR is enabled, the second tone (duh-doo!) will not be heard.
To verify both tones, test using the following setup:
Set the camera to HDR mode
Disable NR
Ensure your phone volume is up and Silent/Do Not Disturb is turned off